Quantum-composers 9530 Series Uživatelský manuál stáhnout pdf (Strana 62)

Page 62 9530/8530 Manual Version 4.8

 The recommended connector is Molex 4 pin female C-grid (Molex #50-57-9404) or

equivalent.

 The recommended contacts are Molex female terminals with gold contacts (Molex #16-

02-0087) or equivalent.

Pin Number:

Connection:

Specification:

1 (denoted by arrow on connector)

+5 Volts DC

5V±2%, 1.2 Amp nominal capability

Ground

+24 Volts DC

24V±6%, 0.8A nominal capability

*Note: For an additional cost a recommended power supply and cable can be supplied

Power Switch Connector (J4 – Pwr_Enab)

 The recommended connector is Molex 2 pin female C-grid (Molex #50-57-9402) or

equivalent.

 The recommended contacts are Molex female terminals with gold contacts (Molex #16-

02-0087) or equivalent.

*Note: This is the power enable switch; Short the contacts to turn the unit on and open them to

power down. (This connector will come shorted)

External Clock Input (J6)

 The recommended connector is a male BNC

Internal Clock Output (J15 and J16)

 The recommended connector for J16 is a male BNC

 The recommended connector for J15 is a Molex 2 pin female C-grid (Molex #50-57-

9402) or equivalent.

 The recommended contacts for J15 are Molex female terminals with gold contacts

(Molex #16-02-0087) or equivalent.

Pin Number:

Connection:

1 (denoted by arrow on connector)

Clock Out

Ground

Output Board Connection (Mini PCB Card Edge)

 This card edge must be connected to either J1 or J2 on the Output Board

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 70 71

Žádné komentáře

Quantum-composers 9530 Series Uživatelský manuál Strana 62